Introduction
This series valve is famous for sensitive reaction and high pressure,
Usually be used to circuit control board connection, it is good for energy saving,
Widely used to IC card gas combustion meter, water saving irrigation, water meter
and various automatic flushing of sanitary ware.
The core of the valve can be pulled and stretched to be the good shape, with
good strictness, credibility, sensitive reaction and long life.
Using Conduction
Fluid Medium: Water, Gas (but not corrosive)
Fluids Temperature: ≤60ºC, please use at the area,
Which relative temperature can't over than 85%
How to use
To exchange the poles of the battery for on-off
Standard technical parameters
Body
Interface size: 3/8-2''
Flow diameter: 13-50mm
Body material: Wrought brass
Connection type: G thread
Pressure class: 0.5-10bar
Structure type: Pilot type
Control type: Normally closed
Components
Seal material: NBR
Medium temperature: 0ºC-60ºC
Ambient temperature: 0ºC-70ºC
Install way: According to the body tag to install, in order to enhance
the valve service life, better coil upward, horizontal installation;
Coil voltage: DC24V/12V, other voltage can be customized
| Pipe Size |
Flow Diameter
(mm) |
Working Pressure
Range
(Kgf/cm2) |
The Max.
Temperature
ºC |
Outline dimension
|
Model |
| Length × Width × Height |
| 3/8" |
10 |
0.5-10 |
60 |
66×48×83 |
SLPM-10 |
| 1/2" |
15 |
66×48×83 |
SLPM-15 |
| 3/4" |
20 |
75×58×88 |
SLPM-20 |
| 1" |
25 |
96×70×101 |
SLPM-25 |
| 11/4" |
35 |
131×96×116 |
SLPM-32 |
| 11/2" |
40 |
|
|
131×96×116 |
SLPM-40 |
| 2" |
50 |
165×120×142 |
SLPM-50 |
Solenoid valve application and selection
1. Valve types: 2/2way 2/3way (3 way valve please note the pressure inlet port working type)
2. Operation type: Normally closed (Power off closed, power on open)
Normally open (Power off open, power on close)
3. Coil optional: Normal temp. (F class) High temp.(H class) Explosion proof (X)
The standard junction box configuration Lead type configuration
4. Voltage: AC V 50/60HZ DC V
Voltage values (V) ______ Power requirement _______ without power requirement ________
5. Medium: Air Water Hot water Steam coil gas Light oil
6. Medium temperature: _______ºC
7. Body material: Wrought brass Casting copper SS304 SS316 Others
8. Pressure: The mini. Inlet pressure______ kfg/cm2 The max. inlet pressure _______ kfg/cm2
After the valve and before the valve pressure difference _______ kfg/cm2
Whether there is the differential pressure in the system
9. Connection size: Inner thread G ______ ANSI thread NPT ______ Flanged ________
10. Flow size _________ mm Or needed to flow under the rated pressure differential
11. Service environment: Ambient temp.: _____ ºC Indoor____ Outdoor_____ Underwater_____ Others _______
12. Other optional: Such as with manual, etc _______________________________________________________________
13. Special requirements: ____________________________________________
){kind=link}